If you're a DIY-er like me, you're always seeing inspiration everywhere. I'm going as Katy Perry for Halloween this year, probably my most involved costume yet. I'm altering my costume (I got a white tutu and am putting sparkly dots on it) and making my jewelry. So if you want to make your own candy button jewelry too, here's how I did it!
Get your Candy Buttons (the kind on the white paper) and clean them up a bit, as they have a tendency to take some of the paper with them when you pop them off.
You'll want to seal the candies so they don't disintegrate in the resin and the color doesn't bleed. In an area with lots of ventilation, spray them with at least two coats of an acrylic spray, I used Krylon. Let dry between coats.
They'll move around a bit but make sure they're coated well!
Make sure they're completely dry, mix up your resin (I use Castin Craft's clear epoxy) and only fill your molds about 1/4 of the way full, just enough to cover the candies. Put your candies in the resin the way you want them. I wanted them to look just like the real thing so I went with the pink/yellow/blue situation. Let cure for as long as required, most require a day to cure.
Now for your final resin step, you can do this in many ways. You can use more clear resin in the last layer and put glitter in it, sprinkles, whatever you want! I used a resin type that cures white, just because I wanted it to look like the candies were on the white paper tape.
Additionally, I wanted some sparkle, so I used a glittery varnish over the piece.
And just because I wanted something fun on my own piece, I put little crystal hearts on the chain and made myself a ring too!
You can make these your own in so many ways, so as long as you have time (and the patience!), you can make tons of fun, unique pieces!
P.S., if you don't have the patience, I have one made up for you to buy in my Etsy shop!
http://www.etsy.com/listing/84580068/sweet-tooth-candi-button-resin-necklace
